Farm King 1370, Руководство оператора и каталог запасных частей

Страница: 42 / 146

Operation - 1370, 1385, 1395, 13114 Backsaver Auger
40
Transporting Procedure
Remove all supports on the discharge end and
anchoring from the intake end (if required).
Figure 28
Use the hydraulic controls or mechanical winch to
move the hopper toward the auger and install the
boom cable (Item 1)
[Figure 28] .
Figure 29
Use the hydraulic controls or mechanical winch
to raise the hopper high enough to install the
transport chain (Item 1)
[Figure 29] .
WARNING
The weight of the hopper and intake auger
assembly must be supported by the transport
chain whenever the auger is moved. If the weight
of the intake auger is on the winch, the winch may
be damaged during transport.
Lower the hopper until the transport chain is
supporting the weight of the hopper and intake
auger.
Enter the tractor, using the tractor controls, slowly
raise the main auger until the discharge spout is
clear from the bin.
Release the parking brake and move the tractor
and auger forward (away from the bin) until there
is adequate space for the auger to be lowered into
the transport position.
Stop the tractor and engage the parking brake.
Figure 30
Fully lower the auger until the upper lift arm
contacts the cradle rest (Item 1)
[Figure 30] .
1
1
1