Farm King 1370, Руководство оператора и каталог запасных частей, Страница: 35 / 146

Operation - 1370, 1385, 1395, 13114 Backsaver Auger
33
AUGER OPERATION
Hopper Operation
Mechanical Winch: Move the winch handle
counterclockwise (towards the hitch) to raise the
lift boom cable (wind cable). Move the handle
clockwise (away from the hitch) to lower the boom
cable (unwind cable).
Hydraulic Winch: Engage the hydraulic circuit for
the hopper / winch control valve on the intake box.
Run the tractor engine at low idle.
WARNING
ENTANGLEMENT HAZARD
To prevent injury to fingers and hands:
• Keep hands clear of winch during operation.
CUT HAZARD
To prevent injury to fingers and hands:
• Always wear heavy leather gloves when handling a
wire rope and operating the winch.
• Never guide the cable with your hands.
• Never let wire rope slip through your hands.
Frayed, kinked or damaged wire rope must be
replaced immediately.
Always stand clear and keep others away during
operation.
Never touch wire rope or hook while in tension or
under load.
Never touch wire rope or hook during winching
operation.
IMPORTANT
Always maintain a minimum of three wraps of
cable on the drum of the winch.
Figure 17
Hydraulic Winch: Move the lever (Item 1) down to
raise the boom cable (wind cable). Move the lever
up to lower the boom cable (unwind cable)
[Figure
17] .
Figure 18
Raise the hopper and release the safety chain
tension. Remove the safety chain hook (Item 1)
from the hopper
[Figure 18] .
Slowly lower the hopper to the ground. Continue
turning the winch handle until cable has enough
slack to be removed from the hopper.
1
1