Farm King 1266, Руководство оператора и каталог запасных частей

Страница: 5 / 32

5
Safety - 1266, 1272, 1276 & 1282 Conventional Auger
Safety
Safety Instructions
An Operator‘s Manual is furnished with each grain auger. Additional or replacement manuals
are available. Do not operate the unit before reading and understanding the Operator‘s Manual.
Understand the operating procedures below to avoid personal injury or death.
The alert symbol is used throughout this manual. It indicates attention is required and identifies
hazards. Follow the recommended precautions.
The safety alert symbol means…
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
General Safety
An auger can collapse and fall on the operator or bystander causing serious injury or death.
Always support the discharge end when the following conditions occur:
• While unit is in operation.
• When dismounting the undercarriage.
The accidental tipping or upending of an auger may cause serious injury or death to the operator
or bystanders. When the grain flow is shut off to the auger an overbalance situation can occur,
suddenly raising the intake auger. Adequate anchorage of the intake end or support from bin is
required at all times, especially in the following conditions:
• While unit is in operation.
• When moving the auger.
• When raising or lowering the auger.
• Maximum elevation is determined by interference between track car and auger structure. The
operator must stop raising the auger before track car reaches the end of the track. Continued
lift will cause failure of the winch, lift cable or auger supports, causing auger to collapse,
which can result in serious injury or death.
Contact with rotating flighting will cause serious injury or death.
• Do not stand on the intake cage.
• Keep hands, feet and clothing away from the intake and discharge flighting.
Operation Safety
Intentional or accidental contact with moving parts may result in a serious injury or death. Observe
the following operating procedures.
• Keep all safety devices in place.
• Do not adjust, service, lubricate, clean, unclog or move the mechanism until all power is
shut off.
• Keep hands, feet and clothing away from moving parts while in operation.
• Keep off the equipment at all times.
• Make certain that everyone is clear of the equipment at all times.
• Make certain that everyone is clear of the equipment before applying power.
• Keep children, visitors and all untrained personnel away from machine while in operation.