Farho SMALL Скачать руководство пользователя страница 2

Page1

      DRY ELEMENT ELECTRIC TOWEL RAIL 

USER MANUAL AND INSTALLATION INSTRUCTIONS 

FOR MODELS: 

 

……………………………………Dry

 

Element

 

Towel

 

Rail

 

700

 

x

 

500mm

 

250w

 

CHROME

 

 

Class

 

I

 

IPX4

  

 

…………………………….……..Dry

 

Element

 

Towel

 

Rail

 

700

 

x

 

500mm

 

250w

 

WHITE

      ‐ 

Class

 

I

 

IPX4

 

 

 

 

WARNINGS 

Keep this instruction sheet with care and read it carefully before using this device. You will so obtain the best performance with the 
highest safety. 

This appliance is intended only for drying textiles washed in water.

This towel rail must be earthed.

Before use, please check that the voltage of the network and that of the appliance are the same (pls. see the technical label).

Always switch off the electricity supply at the mains during cleaning and maintenance.

Electrical safety is guaranteed only if the element is connected to a suitably earthed electricity supply, according to the regulations
in force.

If the supply cord is damaged, it must be replaced by the manufacturer or similar qualified persons in order to avoid hazard.
Failure to comply with the above may endanger the safety of the whole system.

The rail will get very HOT so is NOT suitable for use in locations where this could cause a hazard (e.g. where infirmed persons or

young children will be present unsupervised).

The element must be permanently connected to a suitable electricity supply by way of the cable provided.  This should be via a

fused spur in accordance with the IEE Wiring Regulations.

During the 1

st

 and 2

nd

 usage of this towel rail, there may be some vapour coming from the bottom or top of the vertical profiles for

10-15 minutes.  This is completely normal and happens from the cleaning chemicals used.

IMPORTANT INFORMATION 

This product must be installed by a competent person and in accordance with the current IEE Wiring Regulations. It may be necessary to 
notify your local authority building control department or  to have the work carried out by a suitably qualified electrician. 

The surface of the towel warmer may get very hot so it is not suitable for use in locations where this could be a hazard. In order to avoid a 
hazard for very young children this appliance should be installed so that the lowest heated rail is at least 600mm above floor level. 

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or 
lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and 
understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children 
without supervision. 

The element contains a non-adjustable thermostat  that will switch off and on as the towel warmer reaches temperature. The element also 
contains a non-replaceable thermal fuse safety device that will blow at 119 degrees centigrade if the thermostat were ever to fail. 

PLEASE ENSURE THAT YOU WEAR ALL NECESSARY PERSONAL PROTECTIVE EQUIPMENT FOR YOUR SAFETY.  
Please check that all components are present and that you are ENTIRELY happy with the size, design and finish BEFORE starting 
installation.  

Pack Contents

 

1 x Electric Towel Rail 
3 x Bracket Base 

 

3 x Bracket Stem   

3 x Bracket Front 
3 x Bracket Cover   
3 x Wall Plug 

3 x Wall Screw 
3 x Washer 
3 x Bracket Screw 
3 x Mini Screw

MOUNTING THE TOWEL RAIL ON THE WALL 

This appliance should be fixed on the wall as described below. Only the fixing kit provided 
with the appliance should be used. No adhesive shall be used since they are not considered to 
be a reliable fixing means. 

STEP 1. 

Select your desired mounting position and check that the wall is sufficiently strong 
enough to hold the weight of the towel rail. Mark your preferred bracket positions on 
the wall and drill holes as necessary for the fixings that you are using. The Wall Plugs 
supplied are only suitable for solid walls. Please note: If the wall is other than a solid 
construction other means of fixings will be required.

STEP 2. 

Screw the Bracket Base to the wall using the Wall Screws and Washers provided.

 

Отзывы: