Farho NEXHO-NT, Инструкция по монтажу и эксплуатации

Страница: 47 / 64

46
Select the option “Configure New Scenes” and in the new menu select
“Presence”. ”.If your password request is not deactivated the configuration
password, by default, is “0000”.
Select the modules “Lights”, “Blinds” and “Other Equipment” if you want
them to activate when an intrusion alarm occurs.
Example: You could select “Other Equipment”, an “Alarm” and “On”. The
system would activate the power control module “Alarm” when this intrusion
occurs.
You can configure your intrusion security scene with as many devices as you
wish and have installed.
Once you have finished, press the button “Save”.
In the NEXHO application go to the “Security Systems” menu. Select the
zone with intrusion sensors where you want to activate/deactivate the
security mode. You can also select the option “Activate sensors in every
zone”.
Press the intrusion alarm activate/deactivate button in the selected zone. If
you have not deactivated it, the security password, by default, is “0000”.
Remember when activating the security system, you will have around 45
seconds before the system is loaded, which will give you enough time to
leave the premises while the intrusion detector activates.
The system will also give you 15 seconds approx. before activating the
security scene or before sending it to your mobile device so you have time
to disconnect the security system when entering your house.
How to activate/deactivate your security mode against
intrusions?