Confidential, the whole present document is the sole property of Fargo Telecom (Asia) Ltd.
12
3.2.6
AT+IPBUFF
Description:
This command specifies the number of bytes of data from remote peer buffered inside the
modem.
-
If the quantity of buffered data reach this value, the whole buffered data will be sent out to
the serial port.
-
If the data from remote is large at one time, only multiple of this value data will be sent out
to the serial port remainder will be kept inside buffer
Example:
AT+IPBUFF=5
Syntax:
Command Syntax
AT+IPBUFF=<buff>
Response syntax:
+ IPBUFF: <buff>
Command
Possible responses:
AT+ IPBUFF?
+IPBUFF: 0
OK
Note : show current settings
AT+ IPBUFF =10
OK
Note : set the IPBUFF value to 10
AT+ IPBUFF =0
OK
Note: disable buffering when set the value to 0
1234567890A
BCDEFGH
18 bytes of data sent
from TCP or UDP
socket to modem
1234567890A
BCDE
FGH
15 bytes (multiple of
5) data sent out to
serial port, remaining
data buffered inside
the modem
