Fargo FARGO DTC 400 Скачать руководство пользователя страница 42

Страница: 42 / 341

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400 Card Printer/Encoder User Guide (Rev. 2.2)

3-14

Flipper Table Module Installation

Additional, related links are provided below:



See the

Flipper Table Module Assembly Problems

procedures.



See the Print Both Sides option in the

Using the Device Options tab (DTC400)

section.



See the Front and Back radio buttons in the

Using the Overlay / Print Area tab (DTC400)

section.



See the Front and Back radio buttons in the

Using the K Panel Resin tab (DTC400)

section.

Installing the Flipper Table Module Assembly (D900200)

Step

Description

Caution: Turn off the Printer and unplug the power cord from the

Printer.

Remove the Rear Cover (D90066) to the Printer.

Содержание FARGO DTC 400






















































































































































































































































































































































Результаты поиска

Содержание FARGO DTC 400

Отзывы:

Fargo FARGO DTC 400, Руководство пользователя, Страница: 42 / 341

Результаты поиска

Содержание FARGO DTC 400

Отзывы: