FARGO electronics HDP600 Скачать руководство пользователя страница 152

Страница: 152 / 371

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)

5-14

Logging In

When a User attempts to change any setting, they are asked for a User name and password.
(Note: The Guest Users can only view settings.)

Step

Procedure

Enter the correct User name:



The default administrative User name is root.



The default non-administrative User name is guest.



Non-administrative Users can only view settings.

Enter the correct password:



The default password is an empty string. If the password has not been

changed, leave the field blank.



See Password page procedure for changing passwords.

Press Enter or click on the OK button.

If the name and password is not accepted, another login prompt will appear
on screen.

Repeat this procedure with the correct User name and password.

Содержание HDP600




















































































































































































































































































































































































Результаты поиска

Содержание HDP600

Отзывы:

FARGO electronics HDP600, Руководство пользователя, Страница: 152 / 371

Результаты поиска

Содержание HDP600

Отзывы: