background image

ii

Notices

The information in this document is subject to change without notice.

FARGO ELECTRONICS, INCORPORATED, MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  

FARGO shall not be liable for errors contained herein or for incidental damages in connection with the
furnishing, performance, or use of this material.

This document contains proprietary information which is protected by copyright.  All rights are
reserved.  No part of this document may be photocopied, reproduced, or translated into another
language without the prior written consent of FARGO Electronics, Incorporated.

Patent Pending.

Trademark Acknowledgments

FotoFUN!, FotoMUG!, 

and 

FotoLABEL!

are trademarks and FARGO is a registered trademark of FARGO

Electronics, Incorporated.  IBM is a registered trademark of International Business Machines
Corporation.  Windows is a trademark of Microsoft Corporation.  Apple and Macintosh are registered
trademarks and QuickDraw and AppleTalk are trademarks of Apple Computer, Inc.  All other
trademarks are the property of their respective owners.

Printing History

Edition 1.4, #970627

© Copyright 1997 by FARGO Electronics, Incorporated 
All rights reserved.

For Users in the United States:

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection
against harmful interference in a residential installation.  This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.  However, there is no guarantee that interference
will not occur in a particular installation.  If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

¥

Re-orient or relocate the receiving antenna.

¥

Increase the separation between the equipment 
and receiver.

¥

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

¥

Consult the dealer or an experienced radio/TV technician for help.

Use of a shielded cable is required to comply with the Class B limits of Part 15 of the FCC Rules.

You are cautioned that any changes or modifications not expressly approved in this manual could void
your authority to operate and/or obtain warranty service for this equipment.

For Users in Canada:

This digital apparatus does not exceed the Class B limits for radio noise for digital apparatus set out on
the Radio Interference Regulations of the Canadian Department of Communications.

Le present appareil numerique nÕemet pas de bruits radioelectriques depassant les limites applicables
aux appareils numeriques de la class B prescrites dans le Reglement sur le brouillage radioelectrique
edicte par le ministere des Communications du Canada.

CAUTION!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SIDE OR BACK PANELS.  NO
USER-SERVICEABLE PARTS INSIDE.  REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
OPERATE THE UNIT ONLY ON 100-250 VAC, 50/60 Hz.  USE PRINTER ONLY WITH THE POWER
SUPPLY LABELED FOR USE WITH 

FotoFUN!

510489 FotoFUN!  7/29/98 3:26 PM  Page ii

Содержание FOTO 970627-510489-(04)









































Отзывы: