Farberware FM11BKA, Инструкция по эксплуатации, Страница: 15 / 19

14
13. PIZZA
12. DINNER PLATE
1. Press “
PIZZA
“ repeatedly until the number you wish appears in the display, “4.0”,”8.0”,”14.0”Oz
will display in order.
For example, press “
PIZZA
“ once, “4.0” appears.
2. Press “ START/+ 30sec. “ to cook, buzzer sounds once. When cooking finish, buzzer sounds five
times and then turns back to waiting state.
1. Press “
DINNER PLATE
“ repeatedly until the number you wish appears in the display,
“9.0”,”12.0”,”18.0” Oz will display in order.
For example, press “
DINNER PLATE
” once, “9.0” appears.
2. Press “ START/+ 30SEC. “ to cook, buzzer sounds once. When cooking finish, buzzer sounds five
times and then turns ba ck to waiting state.
14. MEMORY FUNCTION
1. Press “
0/MEMORY
” to choose memory 1-3 procedure. The screen will display 1,2,3.
2. If the procedure has been set, press “
START/+30sec.
“ to use it. If not, continue to set the procedure.
Only one or two stages can be set.
3. If the procedure has not been set, after finishing the setting, press “
START/+30sec.
“ once to save the
procedure and turn back to the waiting states. If press “
START/+30sec.
“ it will start cooking at once
and save the procedure too.
Example:
To set the following procedure as the second memory, that is memory 2. To cook the food with
80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press “
0/MEMORY
” twice, stop pressing until the screen displays “2”.
b. Press “ TIME COOK “ once,then press “3”,”2”,”0” in order.
c. Press “
POWER
“ once, ”PL10” display, then press “8” and “PL8” displays.
d. Press “ START/ +30sec. ” once to save the setting. Buzzer sounds once then the screen will
display “2”. If you press “
START/ +30sec.
” again, the procedure will be saved as the memory 2
and operated.If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
e. If you want to run the saved procedure, in waiting state, press “0/MEMORY” twice, screen
displays “2”, then press “
START/+30sec.
“ to run.