
21
Grounding
I
nstructions:
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk
of electric shock by providing a path of least resistance for the electric current. This appliance is
equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug must be
plugged into an appropriate outlet that is installed and earthed in accordance with all local standards and
requirements.
WARNING!
Improper connection of the equipment earthing conductor can result in the risk of an
electric shock. Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly earthed. Do not modify the plug provided with the appliance. If the plug does not fit
properly to the outlet, please have a qualified electrician to install a proper outlet.
Water
C
onnection
Cold water connection
P
lease take frost protection measures on dishwasher in winter. Each time after washing cycles, please
operate as follow
s:
Connect the cold water supply hose to a threaded 3/4(inch) connector and make
sure that it is fastened tightly in place. If the water pipes are new or have not been
used for an extended period of time, let the water run to make sure that the
water is clear and free of impurities. If this precaution is not taken, there is a risk
that the water inlet can get blocked and damage the appliance.
Please Note: If
the supplied hose
d
oes not fit your tap, please contact your local
plumbing supply center where adapters are available for purchase
.
WARNING!
please close the
faucet
after using.
1.
Screw the faucet adapter onto (or into) the faucet tap. Check for leaks (use Teflon tape to eliminate
if necessary).
2.
Connect the six-sided connection of the drain hose to the drain port connection on the back of the
dishwasher cabinet. Do not over-tighten (to avoid damage to threads).
3.
Connect the star-shaped connection of the inlet hose to the inlet port on the back of the
dishwasher cabinet. Do not over-tighten (to avoid damage to threads).
4.
Connect the circular connection of the drain hose onto the longer (bottom) male connection on the
quick connect.
5.
Connect the circular connection of the inlet hose onto the shorter (top) male connection on the
quick connect.