Faraone PKS 1200E, Инструкция по эксплуатации и обслуживанию

Страница: 36 / 88

USE AND MAINTENANCE MANUAL - SECTION 4
AERIAL PLATFORM PKS 1200E-920-720 - Rev 02_2016 Page 4-1
SECTION 4. CONTROLS, LIGHTS AND MACHINE
OPERATION
INTRODUCTION
ATTENTION
THE MANUFACTURER DOES NOT HAVE ANY DIRECT CONTROL OVER
MACHINE APPLICATION AND OPERATION. THE USER AND THE OPERATOR
ARE REQUIRED TO OBSERVE THE CORRECT SAFETY PROCEDURES.
The PKS 1200E-920-720 model lifting appliances are electric machines
provided with an aerial work platform, assembled on a lifting mechanism with
aluminium upright.
the lifting device is
INTENDED TO MOVE PERSONS TO THEIR WORK
POSITIONS, FROM WHERE THEY CAN CARRY OUT THEIR TASKS FROM THE
WORK PLATFORM.
The main control station is located on the work platform. The operator can
drive the machine and lift, lower and horizontally shift the work platform from
the control console of the platform.
If the operator on the platform is unable to lower it, use the ground control
station's commands when servicing the machine or in an emergency.
Vibrations generated by machines do not constitute any danger for the
operator who is on the work platform. The level of continuous sound pressure
(A measurement) on the work platform is less than 70 db (A).