Faraone ELEVAH 51 MOVE, Инструкция по эксплуатации и обслуживанию

Страница: 35 / 60

USE AND MAINTENANCE MANUAL - SECTION 8
STOCK PICKER ELEVAH 51 MOVE – Rev. 08_2020 Page 8-3
TRANSMISSION MOTOR
INSPECTION OF BRUSHES AND MANIFOLD
It is recommended to proceed as follows:
1. Disconnect the motor and physically detach it from the application;
2. Remove the brake and the silicone coating on the hex head of the tie rods;
3. Mark the contact surface of the tube with the shield and the flanges to the restore proper
alignment;
4. Unscrew the motor tie rods using a 10 [mm] socket wrench
5. Extract the rear shield with the brush holder (using a rubber mallet if necessary) paying
attention not to ruin the o-rings between the tube and the shield/flanges.