
2.5M
3M
6.6M
5.6M
8M
OBSERVATION AREA
2.5M Height - Detection area
3M Height - Detection area
OVERVIEW
MOTION SENSOR 360
FAR-M360-0-10V-LUX
The Faradite Motion Sensor 360 is
a low profile passive infrared ceiling
mounted motion sensor with an
integrated 0-10V (0-1000 Lux) light
sensor. It’s designed for use with
home/building automation systems.
At 2.5M
it gives a 5.6M * 6.6M
detection area.
At 3M
it gives a ~8M diameter, as
shown below.
The following conditions have to
be met to detect motion:
1.Movement speed: 1.0m/s
2.Target concept is a human body
(Min object size: ~700×250mm)
3. The temperature difference
between the target and the
surroundings must be greater
than 4
°
C when mounted at 5m
TECHNICAL DATA
Power supply
(consumption)
12V-24V DC @ 24V
(3mA)
Motion output
voltage
12V-24V DC
Max, motion
output current
80ma
Lux range
0 Lux (0V) -
1000 Lux (10V)
Ambient
temperature
-15-50
°
C
(Indoor Only)
IP Rating
IP20
Range
(Note 1)
5m
Max mounting
height
3m (For optimal
performance)
Motion output
timeout
1 second
Mounting hole
35mm
Dimensions
35mm hole-saw
diameter
49mm rim diameter
c.35.5mm height
Push-fit
connector
AWG 20- 24 CAT5 /
CAT6 / CAT7
Standards
EN 61000-6-1
EN 61000-6-3
ELECTRICAL CONNECTIONS
It is recommended to use CAT cable
to connect the motion sensor to the
building automation system.
1: Strip the cable back 6mm
2: Push into circular hole on the
connector
3: To remove the wire insert the
supplied tool or a small screwdriver
in the slot behind the wire
4: The connector can be removed
from the motion sensor by pulling it
EQUIVALENT CIRCUIT
MOTION OUTPUT
LUX OUTPUT
0V
10V
0 Lux 1000 Lux
OUTPUT
TIMEOUT
1 SECOND
0V
12V- 24V DC
-
0V/GND
L
LUX 0V - 10V
+
12V-24V DC
M
MOTION
CLOSED DURING
MOTION
LUX
SENSOR
Strip back
Push in
Remove
Pull to remove connector from motion sensor
X
Y
X
Y
X
FIRE RATING
The stand-alone Motion Sensor 360
is not fire rated.
To achieve a 60 minute fire rating to
BS 476: Part 21 1987, the optional
Fire IDR must be fitted to the
Motion Sensor 360.
The Fire IDR is an optional extra.
Y
X
Note 1: Please note that the specified range is 5m but under optimal conditions the sensor might detect movement at a much longer range