7
Output Voltage
The Super10 super-cap module and transformer are fully optimized at a factory fixed
voltage output. This output is mentioned at the back, see figure 1, position 3.
Always
check and double check
that this output voltage matches the voltage input of the
device it will be connected to. If these do not match connecting the power supply can
result in permanent damage of the device it is connected to. Farad power supplies
refuses every liability for damage to equipment due to an incorrect connected DC
output voltage.
Current rating of the Farad power supply should be higher than the factory
recommended current. If the manufacturer does not give this value, it can be
calculated from the power figure, as max current = max power / rated voltage. If this
does not work, it also can be obtained by reading the original adapter. Please keep in
mind adapter values are mostly very overrated, so mostly will give a far too high value.
At the Farad website you can find a list of confirmed devices with proper voltage and
connector ratings.
If you are not sure, you can always try out with a Farad power supply, it is fully
protected, so nothing will be damaged if too much current will be drawn. If it works it is
ok. If you don’t feel safe about us, please ask your dealer, or directly at Farad, we are
there to help you!
Output Cable
The power supply has a gold plated GX25-4 output connector. We have connected the
+ voltage output to pin 1 and 3 and the GND to pin 2 and 4.
The Super10 is standardly delivered with a Level 2 copper DC power cable, this can
be upgraded to a silver cable. The Level 2 copper cable contains 2x18 times 24 AWG
tin plated copper wires, the silver cable uses 12x2 0.4mm 99.9999% pure silver wire.
Both cables are terminated with gold plated Oyaide 5.5/2.1 mm or 5.5/2.5 mm barrel
connectors or other connectors at your choice.
Any other connector (within normal connector prices) will be delivered at request at
thew same price as the stock cables. Since this cable needs to be specially made for
you delivery time is about 2-4 weeks after order.
Содержание Super10
Страница 1: ...1 Super10 Owner s manual...
