Installation
Install door external handle
(if external handle is present)
Space Requirement
• Keep enough space of door open�
• Keep at least 50mm gap at two sides�
Levelling the unit
To do this adjust the two levelling feet at
front of the unit�
If the unit is not level, the doors and
magnetic seal alignments will not be
covered properly�
50mm
50mm
4
4
ENGLISH
ENGLISH
Positioning
Install this appliance at a location where the ambient
temperature corresponds to the climate class indicated on the
rating plate of the appliance:
Climate class
Ambient temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
Location
The appliance should be installed well away from sources of heat
such as radiators, boilers, direct sunlight etc� Ensure that air can
circulate freely around the back of the cabinet� To ensure best
performance, if the appliance is positioned below an overhanging
wall unit, the minimum distance between the top of the cabi-
net and the wall unit must be at least 100 mm� Ideally, however,
the appliance should not be positioned below overhanging wall
units� Accurate leveling is ensured by one or more adjustable feet
at the base of the cabinet�
Warning!
It must be possible to disconnect the
appliance from the mains power supply; the plug must
therefore be easily accessible after installation�
