ENGLISH
ENGLISH
GB-15
GB-14
How to install wall mount
• Choose location near power outlet.
Locate point high enough on wall to allow
wand and motorized floor nozzle to hang
freely.
• Place mount against wall and use pencil to
mark drill holes.
• Drill holes (with 1/4" bit) and insert drywall
anchors. Insert screws through holes on mount
and tighten until firmly attached (Fig. 4).
4.
Cord clip
Drywall anchors
Cord clip
Tool
storage
Tool
storage
How to charge battery and store accessories
(Fig. 5)
• Place assembled vacuum cleaner on wall
mount.
• Plug charger into power outlet and then into
charger port on hand vac.
• Loop charger cord into clips on sides of wall
mount.
• Snap tool(s) into tool storage areas.
Battery indicator lights show level of charge
(Fig. 5)
• Indicator lights stop blinking when fully
charged.
• Charge battery fully before using for the first
time. This may take up to four hours.
5.
Battery
indicator
lights