FUNDAMENTAL ACOUSTIC RESEARCH
OWNERS MANUAL PEAK2 (V)
8
Limitor function
The PEAK2 (V) has a built in limitor developed to protect
the drivers against harmful signals. The limitor acts
directly on the input signal by decreasing it when it
reaches the clipping level.
To activate the limitor turn it to the on or off position using
the dip switch on the rear panel.
Figure 1:
limitor switch
The overload LED indicates whether or not the limitor is in
operation.
LED comes :
•
Red when the limitor is not in use.
•
Orange when the limitor is in use.
Rear panel level.
Adjust the sound level by turning the main level knob to
the desired position.
The range of tuning is from 0 (maximum attenuation) to
max (no attenuation).
Adjust the knob (Figure2) to the necessary to attain a
perfect stereo image.
Figure 2
: main level control
