1� Freezer shelf
2� Thermostat and Light
3� Glass shelves
4� Crisper Cover
5� Crisper
6� Water tank for water dispenser
7� Balconies
8� Water dispenser
NOTE:
The appliance design is subject to change without prior notice�
Description of the device
5
4
3
2
1
6
7
8
Installation
Position the appliance and allow it to stand for two to three hours
before it is turned on for the first time to allow the system to set-
tle� Do not position next to any heat source e�g� cooker, boiler or
in direct sunlight etc�
Allow at least 10 cm of space at the top and 10 cm of space on
both sides of the appliance and between the back of the appli-
ance and the wall for adequate air circulation� The appliance is
not designed for recessed installation (“building in”)�
Install on a good firm level surface, and any unevenness of the
floor should be corrected prior to installation, slight unevenness
can be overcome by adjusting the front feet�
NOTE:
If the appliance is positioned on a carpet, soft floor cover-
ing you should readjust the front feet once the appliance has had
time to settle�
45
44
GB
GB
Refrigerant / Amount
R600a / 50g
Product dimension (L x W x H) 6
05
x
600
x
1720
(mm)
Net weight
50kg
Type of installation
Free Standing
(1) Calculation on the basis of results for 24 hours under standard
test conditions� The actual energy consumption will depend
on use and the location of the device�
