MIXER REGULATION
WIRING SCHEME
The scheme below shows an example of actuator wiring:
The brown wire must be connected to the phase, the blue wire
to the neutral and the black to the thermostat in the terminal n°1.
SELECTOR
POSITION
TEMPERATURE
°C
MIN
25
1
35
2
45
3
50
4
55
5
60
MAX
65
Reference Notch
Once the temperature has been set, it is possible to
lock the handle by pressing the screw.
Art.3090-3091
FAR Rubinetterie S.p.A. - www.far.eu
WARNING! Switch power off before operating.!
NEUTRAL
PHASE
BLUE
BROWN
BLACK
40
30
20
10
50
60
70
80
90
WARNING! Do not use the terminal n°2 !
40
30
20
10
50
60
70
80
90
TEMPERATURE SELECTOR:
It is possible to adjust the termperature
by turning the switch with the aid of a
screwdriver
(recommended value 45°C)
EARTHING TERMINAL
PHASE
BLACK WIRE OF
THE ACTUATOR
INSTALLATION OF THE TEMPERATURE PROBE
The temperature probe can be installed direct on the solar tank by means of the threaded seating supplied in the package, or it can be installed on
the solar tank supply line.
The thermostatic mixer can rotate through 360°,
thus facilitating connections, according to the
layout of the system.
