Far south networks Com.X, Руководство администратора

Страница: 125 / 211

Com.X Administrator Guide
Page 125
3.12.2.3 Start
Start routes are special cases of Match routes and match when no DID are available.
These routes are used to assign DIDs to originating calls when no DID information is
present. Start routes will only match if no DID are available. If it is possible that a DID
will be present, include a Match rule as well.
Note: An Include route will take preference over a Start route.
3.12.3 FlexPath Destinations
Calls originating from ports that have been included in a FlexPath may be routed to
the following destinations:
Destination Description
FlexPath Existing FlexPaths. Beware of circular references. Once a call
has been routed to another FlexPath, the matching process
starts with the first route in the destination FlexPath.
Other Internal extensions, feature codes and existing inbound routes.
Please see 3.12.2.1 for more detail.
Outbound Existing outbound destinations.
Table 22: FlexPath destinations
3.12.4 Viewing existing FlexPaths
To view existing FlexPaths, select Start – Configuration – FlexPath.
For each FlexPath, the path name and the current routes included in the path are
displayed. For each route, the route name, DID pattern match, CID match,
description, transform, destination type and destination are shown if available.
Routes are processed in the order in which they are listed in a FlexPath. Paths are
sorted in alphabetical order.
3.12.5 Adding FlexPaths
To add a new FlexPath, select the Add Path button on the FlexPath panel.
©2010 –
2016
Far South Networks