manualshive.com logo in svg

Far south networks Com.X, Руководство администратора, Страница: 104 / 211

Поделиться
Скачать
Far south networks Com.X Скачать руководство пользователя страница 104

Com.X Administrator Guide

Page 104

To make a port that currently has an extension assigned to it available for dynamic 
login, first unassign the extension from the port, resulting in a free extension and a 
free port.

Note: In order to log in dynamically to a free device using a free extension, the 
extension must have a user pin configured.

3.7.6 Configuring SIP extensions

In addition to the basic and advanced configurations (please see 3.7.6), SIP 
extensions also allow the configuration of various voice codecs in order to provide 
compatibility with SIP providers and phones.

Codecs supported by a SIP extension can be selected by using the Codecs button. 
Use Ctrl-Left-Click (holding Ctrl down) to select multiple codecs. Individual codecs 
can be moved up and down the codec priority list by selecting the codec entry, and 
selecting the Up or Down buttons. Codecs may specify the integration time in 
milliseconds after the codec name in the form codec:integrationtime, e.g. 'g729:40'

When negotiating a SIP call, the codec with the highest priority(at the top of the list) 
will be attempted first, then the second and so on.

3.7.7 Remote SIP extensions

When configuring SIP extensions as remote extensions at a remote site (e.g. home 
ADSL), if the Com.X is located behind a NAT/firewall on the network, configure the 
NAT/firewall to forward UDP port 5060 to the Com.X internal IP address. If required 
(no NAT available), also forwards RTP ports 10000-20000 to the Com.X internal IP 
address.

You may also need to configure the external address on the Com.X by selecting Start
-> Configuration -> Setup and then setting the External address. Configure this field 
to the dynamic DNS name or the FQDN that resolves to the external (public) address
of the Com.X (i.e. the external address should be set to the same as will be 
programmed into the remote phone).

If you are using dynamic DNS, make sure that the External Is Dynamic field is set to 
true.

3.7.8 Assigning extensions

Free extensions can be assigned to a port by editing the extension, and selecting the
Port button. From there a menu of available extension ports can be accessed. Only 
available ports are listed in the menus.

Alternatively, drag a free port onto a free extension in the Extensions panel.

3.7.9 Unassigning extensions

Extensions' associations with ports can be removed by selecting the extension in the 
extensions list, and selecting Unassign from its context menu (right-click.)

©2010 – 

2016

 Far South Networks

Содержание Com.X




















































































































































































































Отзывы:

Нет отзывов