3
Configuration Description
1. The call completion function is configured in the <TELE CONFIG MODULE> module of the
configuration file.
Parameter
Description
P1 Call Complete
Call completion function. If the value is 1, when the peer telephone set
switches from the busy state to the idle state, the local telephone set
prompts the user to call back manually or cancel the call. If the value is
0, the call completion function is disabled. (The X5 and X6 series
telephone sets do not support the call completion function, and
therefore the default value is 0 in their configuration files. In the
configuration files of the X3 and X4 series telephone sets, the default
value is 0, indicating that the call completion function is disabled.)
2. To enable or disable the call completion function on the webpage, choose Phone Settings >
Features > Common Settings, select or deselect Enable Call Completion to enable or disable the
function.
