Fanvil LINKVIL W712, Руководство пользователя

Страница: 43 / 59

: 8VHU 0DQXDO
transmission.
9.16 Line >> RTCP-XR
RTCP-XR mode is based on RFC3611 (RTP Control Extended Report), which can measure and
evaluate network packet loss, delay and voice quality by sending RTCP-XR packets.
Table 10 - VQ RTCP-XR Settings
Parameters Description
VQ RTCP-XR Settings
VQ RTCP-XR Session Report VQ report on whether session mode is enabled or not.
VQ RTCP-XR Interval Report Whether to turn on Interval mode for VQ report sending.
Period for Interval Report(5~99) The time interval at which VQ reports are sent periodically.
Warning threshold for Moslq(15~40)
When the device calculated the Moslq value x10 below the
set threshold, a warning was issued.
Critical threshold for Moslq
(15~40)
When the device calculates the Moslq value x10 below the
set threshold, the critical report is issued.
Warning Threshold for Delay(10
~2000
)
When the one-way delay of the device is greater than the
set threshold, warning is issued.
Critical Threshold for Delay(10
~2000
)
When the device computes that the one-way delay is
greater than the set threshold, the critical report is issued.
Display Report Options on device
Whether to display the VQ report data of the last call on the
device
Display Report Options on web
Whether to display the VQ report data for the last call
through the web page.
9.17 device settings >> Features
Configuration device features.
Table 11 - General function Settings
Parameters Description
Basic Settings
Enable Auto Onhook
The device will hang up and return to the idle automatically at hands-free
mode
Auto HangUp Delay Specify Auto Onhook time, the device will hang up and return to the idle