C. Connect the cables of RJ45, power, and electric-lock to the motherboard socket
as mentioned in connectors description (refer to Section 2).
D. Connect the terminal of the wired cable to the motherboard socket (refer to
Section 2).
E. Test whether there is electricity by doing the following: Press the # button for 3
seconds to get the IP address of intercom by voice.Input access password or press
the indoor switch to check electric-lock installation.
Note: Do not proceed mounting until you have finished the electric checking.
F. Attach the device to the wall bracket in a top-down manner, locking the screws at
the Bottom, as shown in Figure 3-6.
Figure 3-6
Flush mounting
Step 1: Installation preparation
A. Check the following contents:
30PPVFUHZV[
30PPVFUHZV[
ijPPVFUHZVDQFKRUV[
.%PPVFUHZV[
7$PPVFUHZV[
ʒ
ʕ
ʓ
ʔ
'VVKGXGTIK
/TYZGRRGZOUT*OGMXGS
Decoration
Panel
Small
Stents
Device
Wall Box
