Fanvil i504 Series, Быстрое руководство по установке, Страница: 5 / 8

C. Fix the wall bracket on the wall with four TA4X30 screws
With 86 embedded box in the wall
A. Fix the wall bracket on the 86 embedded box with two PM4X16 screws
Step 2. Connect peripherals
A. If you need to connect other input and output devices, please connect to the host through the cable
Step 3. Power on the device. If it is working properly, align the slot on the rear side of the panel with
the pin on the wall bracket and slide the host down to complete the installation.
Model 2.Desktop Installation
Align the slot on the rear side of the panel with the pin on the desktop bracket and slide the bracket
up to complete the installation
.
5. Searching IP address
Method of querying device IP addresses. The default WAN mode is DHCP.
After booting, click “menu”---“Status”---“Network” to query.
6. IP Indoor Unit Setting
Step 1: Log in the web setting page of Indoor Unit
Input IP address of indoor unit (e.g. http://
172.18.90.14
) into the address bar of PC’s web browser.
The default user name and password are both admin