There are two methods as shown below to search the device.
Method 1:
Open the iDoorPhone Network Scanner. Press the Refresh button to search the device and find the
IP address.
（
Download address http://download.fanvil.com/tool/iDoorPhoneNetworkScanner.exe
）
Method 2:
Long press DSS key for 10 seconds(after power-on for 30 seconds), and when the speaker beeps
rapidly, press DSS key again quickly, the beeps stop ,the intercom will report the IP address by itself.
4
√
√
In addition, device provides the device surface DSS key operation to switch IP address acquisition
mode:
Long press the DSS key for 10 seconds, to be issued by the speaker Beep, and then press the DSS
key three times, the beep stops. Wait 10 seconds, after the success of the system automatically
broadcast the current IP address.
Wall-mounted:
1) Use built-in screw tool to remove the surface shell;
2) Based installation dimensions, mounting hole in the wall to draw, use an electric drill holes lay;
3) The white rubber plugged into the wall and the bottom fixed with screws to the wall;
4) After connecting the power cord and network cable, screw the surface shell fixed.
Installation Diagram
3
Searching Door Phone
4
192.168.1.128
