[
䬂ܹ᭛ᄫ
]
Page determines the priority equipment current in multicast session, how to deal with the new
receiving multicast RTP stream, enabling the Page switch priority, the device will automatically ignore the
low priority of multicast RTP stream, receive priority multicast RTP stream, and keep the current multicast
session in state; If is not enabled, the device will automatically ignores all receive multicast RTP stream.
z
Web Settings:
The multicast SS priority is higher than that of EE, the highest priority.
Note: when a multicast session key by multicast, multicast sender and receiver will beep.
Listener configuration
z
Blue part (name)
The "group of 1" and "2" and "3" are you setting monitoring multicast name, answer time is displayed
on the screen, if you do not set the screen will display the IP: port directly.
z
Purple part (host: port)
Is a set of addresses and ports to listen, separated by a colon.
z
Pink part (index / priority)
Multicast is a sign of listening, but also the monitoring multicast priority, the smaller the number of
higher priority.
z
Red part (priority)
Is the general call, non multicast call priority, the smaller the number of high priority, the following will
explain how to use this option:
