[
键入文字
]
18
/
59
Field Name
Explanation
DHCP
Network parameters are provided automatically by a DHCP server.
PPPoE
Account and Password must be input manually. These are provided by your ISP.
If Static IP is chosen, the screen below will appear. Enter values provided by the ISP.
After entering the new settings, click the APPLY button. The equipment will save the new settings and
apply them. If a new IP address was entered for the equipment, it must be used to login to the phone
after clicking the APPLY button.
802.1X Settings
User
802.1X user account
Password
802.1X password
Enable 812.1X
Enable or Disable 812.1X
Service port Settings
Web Server Type Specify Web Server Type – HTTP or HTTPS
HTTP Port
Port for web browser access. Default value is 80. To enhance security, change this from
the default. Setting this port to 0 will disable HTTP access.
Example: The IP address is 192.168.1.70 and the port value is 8090, the accessing
address is http://192.168.1.70:8090.
HTTPS Port
Port for HTTPS access. Before using HTTPS, an HTTPS authentication certification must
be downloaded into the equipment.
Default value is 443. To enhance security, change this from the default.
Telnet Port
Port for Telnet access. The default is 23.
RTP Port Range
Start
Set the beginning value for RTP Ports. Ports are dynamically allocated.
RTP Port
Quantity
Set the maximum quantity of RTP Ports. The default is 200.
Note:
1.
Any changes made on this page require a reboot to become active.
2.
It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024.Values less
than 1024 are reserved.
3.
If the HTTP port is set to 0, HTTP service will be disabled.
