33
Reader
Dial Mode Select
<Primary /Secondary>mode
corresponds to the first number in
one-button Call function, <Day/Night>mode
corresponds to the second number in
one-button Call function
Primary /secondary
Time of Switch
The period between one-button Call function
to call the first and second number
16s
Day Start Time
When select <Day/Night>mode, the time to
start Day time
06:00
Day End Time
When select <Day/Night>mode, the time to
end up Day time
18:00
Address of Log
Server
Log server address（IP）
Port of Log
Server
Log server port（0-65535，default:514）
Enable Log
Server
Enable or Disable the log server
Disable
Enable Indoor
Open
Use to disable or enable the indoor open
function
Disable
Remote Phonebook
Number
Remote phone number
Authentication
code
Access code for visitor. When remote
phone calls, if the number is in access list,
you can input access code to open the
door.
When IP phone calls, it
needs to input
authentication code
to
control voice access
controller.
Type of Host
When owner calls, controller answer
automatically, when visitor calls, controller
mute.
Name
Card holder’s name
Position
Card holder’s position
Department
Card holder’s department
Card number
RFID’s number
To add new visitor, add the visitor number in <Number> and <Access Code>;Visitor’s Name,
Position and Department is optional; And then Select the ID (Card number) and Access Type
(Visitor or Owner).Press<Add> key to add new visitor. The visitor can call the door phone and input
the access code to open the door or use ID card to open the door. Maximum 100 visitors
To modify visitor data, click <Delete> or <Modify> key to delete/modify the visitor data, all data
can be modified except calling number
After you set the log server, i20T will send log data to the log server.
Data format:
<8>MAR 20 11:17:38 5,0003476426,IC Card,I20 IP Door Phone
[Note]:
