Fanvil i20S Скачать руководство пользователя

Страница: 27 / 50

[

键入文字

]

/ 50

Caller ID Header

Set the Caller ID Header

Enable Strict Proxy

Enables the use of strict routing. When the phone receives packets from the

server, it will use the source IP address, not the address in via field.

Enable user=phone

Sets user=phone in SIP messages.

Enable SCA

Enable/Disable SCA (Shared Call Appearance )

Enable BLF List

Enable/Disable BLF List

Enable DNS SRV

Set the line to use DNS SRV which will resolve the FQDN in proxy server into a

service list

Keep Alive Type

Set the line to use dummy UDP or SIP OPTION packet to keep NAT pinhole
opened

Keep Alive Interval

Set the keep alive packet transmitting interval

Enable Session Timer

Set the line to enable call ending by session timer refreshment. The call session
will be ended if there is not new session timer event update received after the
timeout period

Session Timeout

Set the session timer timeout period

Enable Rport

Set the line to add rport in SIP headers

Enable PRACK

Set the line to support PRACK SIP message

Keep Authentication

Keep the authentication parameters from previous authentication

Auto TCP

Using TCP protocol to guarantee usability of transport for SIP messages above

1500 bytes

Enable Feature Sync

Feature Sycn with server

Enable GRUU

Support Globally Routable User-Agent URI (GRUU)

BLF Server

The registered server will receive the subscription package from ordinary

application of BLF phone.
Please enter the BLF server, if the sever does not support subscription package,

the registered server and subscription server will be separated.

BLF List Number

BLF List allows one BLF key to monitor the status of a group. Multiple BLF lists
are supported.

SIP Encryption

Enable SIP encryption such that SIP transmission will be encrypted

SIP Encryption Key

Set the pass phrase for SIP encryption

RTP Encryption

Enable RTP encryption such that RTP transmission will be encrypted

RTP Encryption Key

Set the pass phrase for RTP encryption

Содержание i20S



















































Результаты поиска

Содержание i20S

Отзывы:

Похожие инструкции для i20S

Бренды по названию

Популярные бренды

Fanvil i20S, Руководство пользователя

Результаты поиска

Содержание i20S

Отзывы:

Похожие инструкции для i20S

Бренды по названию

Популярные бренды