`
32 / 43
ZZZIDQYLOFRP
32
Select the video codec type, it’s recommended to use “Base Line” to stay the same as the video
output or stream receiver.
Advanced Settings
Video
Direction
Select the transport type of the video stream
H.264 Payload
Type
Set the payload type of H.264
RTSP Information
Main Stream
Url
Access the main address of RTSP
Sub Stream
Url
Access the child address of RTSP
d) MCAST
It is easy and convenient to use multicast function to send notice to each member of the
multicast via setting the multicast key on the device and sending multicast RTP stream to
pre-configured multicast address. By configuring monitoring multicast address on the device,
monitor and play the RTP stream which sent by the multicast address.
MCAST Settings
Equipment can be set up to monitor up to 10 different multicast address, used to receive
the multicast RTP stream sent by the multicast address.
Here are the ways to change equipment receiving multicast RTP stream processing mode
in the Web interface: set the ordinary priority and enable page priority.
z
Priority:
In the drop-down box to choose priority of ordinary calls the priority, if the priority of the
