Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Shenzhen Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997
Email: [email protected] [email protected] Beijing Tel: +86-10-5753-6809
- 39
Priority:
In the drop-down box to choose priority of ordinary calls the priority, if the priority of the incoming
flows of multicast RTP, lower precedence than the current common calls, device will automatically ignore
the group RTP stream. If the priority of the incoming flow of multicast RTP is higher than the current
common calls priority, device will automatically receive the group RTP stream, and keep the current
common calls in state. You can also choose to disable in the receiving threshold drop-down box, the
device will automatically ignore all local network multicast RTP stream.
The options are as follows:
1-10: To definite the priority of the common calls, 1 is the top level while 10 is the lowest
Disable: ignore all incoming multicast RTP stream
Enable the page priority:
Page priority determines the device how to deal with the new receiving multicast RTP stream
when it is in multicast session currently. When Page priority switch is enabled, the device will
automatically ignore the low priority multicast RTP stream but receive top-level priority multicast RTP
stream, and keep the current multicast session in state; If it is not enabled, the device will
automatically ignore all receiving multicast RTP stream.
Web Settings:
The multicast SS priority is higher than that of EE, which is the highest priority.
Note: when pressing the multicast key for multicast session, both multicast sender and receiver will
beep.
Listener configuration