Fanvil H5W, Руководство администратора и пользователя

Страница: 64 / 80

65
Push XML Server
Configure the Push XML Server, when phone receives request, it will
determine whether to display corresponding content on the phone which
sent by the specified server or not.
Enable Pre-Dial
Disable this feature, user enter number will open audio channel
automatically.
Enable the feature, user enter the number without opening audio channel.
Enable Multi Line
If enabled, up to 10 simultaneous calls can exist on the phone, and if
disabled, up to 2 simultaneous calls can exist on the phone.
Line Display Format Custom line format: SIPn/SIPn: xxx/xxx@SIPn
Contact As White List Type NONE/BOTH/DND White List/FWD White List
Block XML When Call Disable XML push on call.
SIP notify
When enabled, the phone displays the information when it receives the
relevant notify content.
Tone Settings
Enable Holding Tone When turned on, a tone plays when the call is held
Enable Call Waiting Tone When turned on, a tone plays when call waiting
Play Dialing DTMF Tone
Play DTMF tone on the device when user pressed a phone digits at
dialing, default enabled.
Play Talking DTMF Tone
Play DTMF tone on the device when user pressed a phone digits during
taking, default enabled.
Response Code Settings
Busy Response Code Set the SIP response code on line busy
Reject Response Code Set the SIP response code on call rejection
Password Dial Settings
Enable Password Dial
Enable Password Dial by selecting it, When number entered is beginning
with the password prefix, the following N numbers after the password
prefix will be hidden as *, N stand for the value which you enter in the
Password Length field. For example: you set the password prefix is 3,
enter the Password Length is 2, then you enter the number 34567, it will
display 3**67 on the phone.
Encryption Number Length Configure the Encryption Number length
Password Dial Prefix
Configure
the prefix of the password call number
Power LED
Common
Standby power lamp state, off when off, open is always bright red. Off by
default.
SMS/MWI
The status of power lamp when there is unread short message/voice
message, including off/on/slow flash/quick flash, default slow flash.
Missed The state of the power lamp when there is a missed call, including