background image

Issue

Solution

Receiver is not picking up 
any sound

First, check if the phone cable is in the Handset port and not 
the Headset port (page 5)

Then, dial 121 to do an echo test. While on the call, press the 
volume key and make sure the volume hasn’t been turned 
down.

Check if the speaker phone is working.

The receiver or curly cord may be faulty. If possibly, swap 
these with any others you have to confirm if it is the receiver/
curly cord

Poor Audio or Low Volume 
in Headphone 

The network bandwidth from your ISP may not be suitable for 
audio calls please make sure to contact your ISP to see if there 
is an issue with your line

Also make sure that your headphone are compatible with the 
Fanvil handset as this is the cause of poor audio quality

Phone is not ringing

You may have DND on the handset. If you do, you’ll see an icon 
on the LCD display. See Page 15 - ‘Putting the phone on DND 
mode’ 

Phone says Network Down

If the phone LCD display says Network Down or the network 
status is hollow then it means that your IT network may be 
experiencing issues. First, check if your computer and other 
devices have a working internet connection and can load up 
web pages.

If you do have an internet connection, you may need to reboot 
your router or any network switches that you have. If this 
doesn’t help, contact the support team.

If you have no internet connection on any device, you may 
need to contact your ISP or building manager.

Busy Lights are not green

Only other extensions can show as green. If you enter a num-
ber as a speed dial, the key will not light up.

If you have rebooted the handset and the Busy Lights have not 
come back on please make sure you have typed in the correct 
extension number for the busy light and try again

28

Faults and Solutions

Содержание GXP 2130































Отзывы: