Fanvil G100S, Руководство пользователя

Страница: 8 / 41

[
䭞ޕ᮷ᆇ
]
8 / 41
Getting Started
Before you start using the device, please make the following installation:
Connecting the Power and the Network
Connecting the Network
Before this step, please make sure your environment can satisfy the requirement of broadband
network access.
Please connect one end of the network cable to the device's WAN port and the other end connect
to your broadband router's LAN port. Now you have completed the network hardware connection.
In most of the cases, you need to set your device's network as the DHCP mode. (The default
mode of the device is DHCP)
Connecting the Power
Before proceeding with this step, please make sure your power connector and electrical outlet
for the agreement, at the same time, the voltage and current are also conform to what the device
need.
a) Put the DC port connect to the power port that on the back of the device.
b) Put the AC adapter plug connect to an electrical outlet, the device starts to boot.
c) At this point, all of your indicator lights (except the power light) will twinkle together. After the
boot is completed, the indicator lights will be on according to your current configuration. (If
your lights is unnormal, we need to further configure your network online mode)
d) If the device has landed on the server, you can start a call right now.
G100S