Fanvil FH-S01, Руководство пользователя

Страница: 9 / 63

4
5
Install Guide
5.1
Use POE or external Power Adapter
FH-S01, supports two power supply modes, power supply from external power adapter or over
Ethernet (POE) complied switch.
POE power supply saves the space and cost of providing the device additional power outlet.
With a POE switch, the device can be powered through a single Ethernet cable which is also
used for data transmission. By attaching UPS system to POE switch, the device can keep
working at power outage just like traditional PSTN telephone which is powered by the telephone
line.
For users who do not have POE equipment, the traditional power adaptor should be used. If the
device is connected to both POE switch and external power adapter, FH-S01 will get power
supply from POE switch in priority, and change to external power adapter once the POE power
supply fails.
Please use the power adapter supplied by Fanvil and the POE switch met the specifications to
ensure the device work properly.
5.2
Appendix
5.2.1
LED Status
Table 1 - LED Status
Type Status
description
Status Light
Ring
When the call is ringing, the LED light
will flash slowly. It supports four states:
ON
、
OFF
、
Fastblink and Slowblink .
Default Slowblink, settable
In Using
The display status of the LED light in the
call or dialing status. It supports four
states: ON
、
OFF
、
Fastblink and
Slowblink . Default OFF, settable
Network Abnormal When the network is in an abnormal