background image

Printed in China

Model PT301H

TWO (2) YEAR LIMITED WARRANTY

FANTOM warrants this product to be free from defects in material and workmanship for a period of two (2) years

from the date of the original purchase, when utilized for normal household use, subject to the following conditions,

exclusions and exceptions.

If your appliance fails to operate properly while in use under normal household conditions within the warranty

period, return the complete appliance and accessories, freight prepaid to FANTOM, 178 W. Service Rd.

Champlain, NY 12919. If the appliance is found by 

FANTOM

  to be defective in material or workmanship,

FANTOM

  will repair or replace it free of charge. Proof of purchase date and $ 14.95 to cover the cost of return

shipping and handling must be included. *

Non-durable parts including, without limitation, router bits, cutting bits, drill bits, carbon brushes and electrical

parts which normally require replacement are specifically excluded from warranty.

The liability of 

FANTOM 

 is limited solely to the cost of the repair or replacement of the unit at our option. This

warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used

for commercial purposes. This limited warranty does not cover damage caused by misuse, abuse, negligent

handling or damage due to faulty packaging or mishandling in transit.  This warranty does not cover damage or

defects caused by or resulting from damages from shipping or repairs, service or alterations to the product or any

of its parts, which have been performed by a repair person not authorized by 

FANTOM

.

This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventional

warranties. The responsibility of 

FANTOM 

 if any, is limited to the specific obligations expressly assumed by it

under the terms of the limited warranty. 

In no event 

is 

FANTOM 

 liable for incidental or consequential damages of

any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential

damages, so the above may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date

and to attach tag to item before packing with your name, complete address and phone number with a note

giving purchase information, model number and what you believe is the problem with item. We

recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the

outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our

products, therefore the specifications contained herein are subject to change without notice

.

$

ŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸŸ

OWNERSHIP REGISTRATION CARD

Please fill out and mail the product registration card within ten (10) days of purchase in order to validate
the foregoing Limited Warranty. The registration will enable us to contact you in the unlikely event of a
product safety notification. By returning this card you acknowledge to have read and understood the
instructions for use, and warnings set forth in the accompanying instructions.

RETURN TO 

FANTOM

: 178 W. Service Rd. Champlain, NY 12919

_______________________________________________________________________

Appliance model

______________________________________________________________________________
Date purchased                                   Name of store

________________________________________________________________________________
Owner’s name

________________________________________________________________________________
Address                                  City                              State                                  Zip Code

Model PT301H

Содержание PT301H



















Отзывы: