Storage
For extended periods of storage, we recommend disassembling the engine and generously coating all the internal parts of the
engine with a high quality lubricant. Again, our Fantom Rip Saver lubricant (part # FAN20110) works great for this. After coating
all the internal parts, reassemble the engine. A light mist of WD-40™ on the outside of the engine will also prevent any corrosion
of external parts.
CAUTION STATEMENT
•
Use common sense when operating your vehicle. No engine, no matter what brand, can withstand the abuses of
continuous wide-open operation, severe crashes, neglect, or improper use.
•
You are responsible for the maintenance of your equipment from the aspect of safety, performance, and longevity.
•
Nitro powered vehicles can reach very high speeds; they can cause severe damage and injury to persons and property
if not handled properly. Use caution and exercise courtesy when operating your vehicle around people and property.
•
Children should ALWAYS be under adult supervision when operating nitro-powered vehicles.
•
Model engines operate at high temperatures, which can cause severe burns. Always be careful when handling your
vehicle to avoid touching hot components.
•
Use caution when handling a vehicle with the engine running; moving parts such as the clutch and gears can cause
severe injury.
•
Use caution when handling model car fuel. Model car fuel can be a very hazardous material if used improperly; always
follow the manufacturer’s safety warnings and instructions.
•
Run your vehicle in well-ventilated areas – never indoors – exhaust fumes can be very dangerous.
•
Fantom has no control over the use of this product, and therefore accepts no responsibility and cannot be held responsible
for any damage or injury caused by its use or misuse.
•
The user accepts all responsibility for the use of this product.
22
269. 649. 9583
