Fantom FM744H, Инструкция по эксплуатации

Страница: 12 / 21

AIR DRIVEN TURBO BRUSH
10
Using the Unit With Air Driven Turbo Brush
The efficiency of your Air Driven turbo brush depends on the bristle brush rotating at high speed.
Strong air suction is needed to accomplish this. In order to ensure that maximum air suction is
maintained, please read the following instructions:
1. Always empty the dust cup container frequently during use. Follow instructions on dust
container.
2. Ensur that the rotating brush is kept free of hair and string which may accumulate and
decrease brush performance.
3. Keep Air Driven Turbo Brush turbine free of dirt and foreign matter. (see illustration below
for cleaning instructions.)
IMPORTANT TURBO BRUSH INSTRUCTIONS
The efficiency of your Air Driven Turbo Brush depends on the bristle brush rotating at high
speed. Strong air suction is needed to accomplish this.
In order to ensure that maximum air suction is maintained, please read the following
instructions:
1) Empty the Dust Container frequently during use. Follow instructions for dust container.
2) Ensure that the rotating brush is kept clear of hair and string.
3) Inspect the turbine regularly to ensure that the air passage is free of dirt and debris.
From time to time, the turbine of your Turbo Brush will require cleaning. To do this:
1. Remove the turbo brush from the hose or extension tube.
2. Slide locking latch forward then tilt the top housing of the brush upwards. The top housing is
hinged and will tilt up approximately 45
only.
3. There may be some dust, lint, hair, etc on the turbine wheel. Remove as much of this as possible.
4. You may also use the unit's hose with crevice tool attached and use the vacuum to remove
any additional debris from the turbine.
5. Ensure that the turbine wheel moves freely by rotating it with your finger. If the turbine does
not rotate, call FANTOM Customer Service for help.
6. Once clean, close the top cover of the Turbo Brush and slide the locking latch toward the rear
of the brush to lock.
Cleaning Air Driven Turbo Brush
Your Air Driven turbo Brush may be used with either the extension tubes or the flexible hose.
Using The Unit With Air Driven Turbo Brush
Turbine
Locking Latch
Tilt
Upwards