
Cleaning HEPA Dust Cup Filter (cont.)
4.
Vigorously "TapClean" the HEPA dust cup filter on a hard surface until
no more dust is observed falling out. The HEPA filter may also be
washed by running it under the tap allowing the water to run on the dirty
side. We recommend washing it once a month or when suction appears
reduced. Always allow 24 hours for air drying before replacing into the
vacuum.
Please Note
: The white material in the HEPA filter will discolor over time - This
is NORMAL and will NOT affect the performance of the filter.
Cleaning HEPA Dust Cup Filter (cont.)
4.
Vigorously "TapClean" the HEPA dust cup filter on a hard surface until
no more dust is observed falling out. The HEPA filter may also be
washed by running it under the tap allowing the water to run on the dirty
side. We recommend washing it once a month or when suction appears
reduced. Always allow 24 hours for air drying before replacing into the
vacuum.
Please Note
: The white material in the HEPA filter will discolor over time - This
is NORMAL and will NOT affect the performance of the filter.
Cleaning the HEPA Filter Frame
1. Before replacing the HEPA filter in the HEPA Filter frame, you should
rinse the frame in lukewarm water by just running it under the tap to remove
any dust that is adhering to the frame. Do
NOT
place in dishwasher.
2. Make sure that the filter frame is completely dry before replacing into the dust cup.
Always air dry for 24 hours.
Cleaning the HEPA Filter Frame
1. Before replacing the HEPA filter in the HEPA Filter frame, you should
rinse the frame in lukewarm water by just running it under the tap to remove
any dust that is adhering to the frame. Do
NOT
place in dishwasher.
2. Make sure that the filter frame is completely dry before replacing into the dust cup.
Always air dry for 24 hours.
Warning:
Always clean the HEPA Filter Frame after each use and
during prolonged usage to prevent the vacuum from
overheating and damaging the motor.
Warning:
Always clean the HEPA Filter Frame after each use and
during prolonged usage to prevent the vacuum from
overheating and damaging the motor.