Fantom FM604C, Руководство пользователя

Страница: 9 / 14

TROUBLE SHOOTING GUIDE
7
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
VACUUM WILL
NOT OPERATE
1. Power cord not firmly plugged into
outlet.
2. No power in wall outlet.
3. Needs servicing.
4. Thermostat has tripped.
1. Plug unit in firmly.
2. Check fuse or breaker. Replace
fuse/reset breaker.
3. Call 1 (800) 275-9251.
4. Turn the unit off and unplug from
outlet. Allow unit to cool down,
then restart.
VACUUM WILL
NOT PICK-UP OR
SUCTION POWER
IS WEAK
1. Dust cup (container) is full.
2. Unit clogged.
3. HEPA –Type filter needs cleaning
or replacing.
1. Empty and clean dust cup
(container).
2. Turn unit off and unplug from
wall outlet. Remove dust cup
(container) and check for
object(s) in air duct and remove.
3. Clean or replace HEPA-Type
filter.
DUST ESCAPING
FROM VACUUM
1. Dust cup (container) is full.
2. Dust cup is not installed correctly.
1. Empty and clean dust cup
(container).
2. Review dust cup instructions.
VACUUM, HOSE
OR BRUSHES
WILL NOT PICK-UP
1. Hose clogged.
2. Dust cup (container) is full.
1. Remove hose and/or brushes.
Remove obstruction from hose
and /or brush.
2. Empty and clean dust cup
(container).
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT HEPA-TYPE FILTERS
for Model FM604C
Call: 1 (800) 275-9251
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
or visit our website: www.fantom.com
FOR TECHNICAL SUPPORT
for Model FM604C
Call: 1 (800) 275-9251
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note:
The HEPA-Type filter is washable. It should, however, be replaced every three (3) to
six (6) months to ensure peak performance of your vacuum.
Important:
Make sure that ALL filters have been completely air dried for 24 hours before re-
installing back in the vacuum.
18
Fiche Technique
Tension: 120 V, 60 Hz
Intensité: 8.3 A
11. Roue arrière
12. Brosse à plancher
13. Coupelle à poussière
(réservoir)
14. Couvercle de la coupelle à
poussière
15. Poignée de la coupelle à
poussière
16. Suceur plat
17. Cordon d’alimentation
18. Poignée à prise facile
19. Filtre HEPA
(non illustré)
20. Pince de rangement de la
poignée
1. Poignée
2. Bouton de relâche de la poignée
3. Bouton de mise en marche
4. Poignée de transport/Porte-tuyau
5. Bouton de relâche de la poignée
de la coupelle
6. Bouton de rembobinage du cordon
7. Brosse à épousseter
8. Tuyau souple
9. Porte-tuyau flexible
10. Bouton de relâche de la brosse à
plancher
FAMILIARISEZ-VOUS AVEC VOTRE ASPIRATEUR
VERTICAL À RÉTRACTEUR
*Les illustrations peuvent différer du produit lui-même.