Fantini Cosmi CH193VMC, Инструкция по эксплуатации

Страница: 12 / 44

CH193VMC
12
CENTRALISED CONTROL FOR VMC UNITS
Pressing or allows you to select the VMC profile depending on the time.
SETTABLE SPEEDS:
■ OFF
■ 1 = V1
■ 2 = V2
■ 3 = V3
■ Pressing ENTER to go to the next day.
■ Pressing COPY allows you to copy the temperature profile displayed to the following day.
1.1 - SETTING MACHINE OPERATION IN INTEGRATION
Note: it is possible to set the machine for manual operation (T MAN) and automatic operation (T ECO/TCOMF).
When TEMP is selected: AUTO is displayed, then follow the procedure described in 3 and 4.
Note: Can be set from the "Advanced Programming" menu.
If the machine is designed to integrate heating and/or cooling, it is possible
to set the temperature set point with a weekly programme (with resolution
every 30 minutes) or manually.
4
COPY ENTER
1
DAY
1
COPY ENTER
2
DAY
1
COPY ENTER
3
DAY
1
COPY ENTER
4 DAY
1
ENTER COPY
1 DAY
1
2s
2
1
15:25 15-09-20
23.0
SEL TEMP PROG DISP OFF
x3
TEMP: AUTO
PROG
TEMP: AUTO
TEMP: MAN