8
Fastening the socket
The thermostat is supplied complete with a
socket suitable for mounting both on the wall
and to rectangular or round built-in 3-seat
boxes (503).
Remove the thermostat top cover.
Separate the thermostat socket and front by
removing the screw by means of a suitable tool
and taking the front part off.
Fasten the socket to the desired surface by
means of the special fastening holes; make
sure that the socket is properly engaged, with
no deformation, and that the connecting multi-
pole connector is located in the right bottom
corner.
DRILLING CENTERS
SCREWS
SOCKET
FASTENING
HOLES
MULTI-POLE CON-
NECTOR
Maintenance
The thermostat should be cleaned by using
a soft cotton cloth. No detergent should be
used.
Installation
The thermostat installation involves carrying
out the following operations:
• Fastening the socket;
• Making the electric connections;
• Fastening the thermostat onto the socket;
• Con
fi
guring the thermostat parameters.
Warning! The thermostat shall be installed only
by quali
fi
ed personnel, in strict compliance with
the law regulations in force.
60.0
83
