Fantini Cosmi Aspira SUPERKALI A-VB, Руководство пользователя и инструкция по установке

Страница: 12 / 16

12
E N G L I S H
6. INSTALL METHOD
Connect the line
• When installing dryer without junction box , you should install above
the right side of dryer two-hole standard outlet corresponds to hand
dryer .The distance should be 20-50cm.
• When installing dryer with junction box, directly connecting power cord
is needed. Otherwise, power cord will be forced out of body and can not
be properly installed.
Place metal board
• fix the metal board on wall with screws according to size as shown
in picture.
Demolish the water disposal box
• Use one hand slightly open the buckle a little, while another hand pulls out
water disposal device.
Installation of body
Hang the product on the metal plate on wall as shown in picture.
fix the body
Push as shown in picture.
Remove the air filter box and fasten the two screws.
Install filter box and water disposal pan
Slowly advancing fil ter as mapindicates. Push
water disposal pan to the end.
IMPORTANT:
before use, remove the protective film from the infrared sensor.