1
SER Models
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
SER 1504, SER 1504N, SER 2004, SER 2004N, SER 3204D & SER 3204N
Your ventilation system should be installed in conformance with the appropriate state requirements or in the
absence of such requirements ASHRAE’s “ Good Engineering Practices”.
IMPORTANT - PLEASE READ THIS MANUAL
BEFORE INSTALLING UNIT
CAUTION -
Before installation, careful consideration must be given to how this system
will operate if connected to any other piece of mechanical equipment, i.e. a forced air furnace
or air handler, operating at a higher static. After installation, the compatibility of the two pieces
of equipment must be confirmed by measuring the airflow’s of the Energy Recovery Ventilators
by using the balancing procedure found in this manual.It is always important to assess how
the operation of any ERV may interact with vented combustion equipment (i.e. Gas Furnaces,
Oil Furnaces, Wood Stoves, etc.).
NEVER -
install a ventilator in a situation where its normal operation, lack of operation or
partial failure may result in the backdrafting or improper functioning of vented combustion
equipment!!!
SER Series
Energy Recovery Ventilator