Fantec MR-35DUF, Руководство пользователя

Страница: 8 / 11

8. Name and format the partition and click .
9. Review the file system settings and click to create the logical partition.
Important: Before reconfiguring a volume, back up your data and drag the old
drive to the trash to un-mount previously defined SteelVine Storage Reference
Design partition. If no hard drives are connected to the Storage Appliance, the
SteelVine Processor disk (8.0 GB Config Disk Media) will appear. Do not remove
or modify that partition. After you configure and partition the new volumes, restore
the backed-up data to the new configuration.
1. Launch
from the > folder.
Next
Finish
Mac OS X
Disk Utility Application Utilities
2. Select a configured disk and click the Partition tab. This procedure illustrates
the
Storage Policy configuration, which concatenates the capacity of all hard
drives connected to the SteelVine Storage Reference Design.
BIG
3. Select 1 from the drop-down list.
4. Enter a name for the volume in the field (such as “My BIG disk”.)
Partition Volume Scheme
Name
13
5. Select from the Format drop-down list.
6. Specify the size of the partition in the field.
7. Click the button.
8. Click to acknowledge the warning.
Mac OS Extended (journaled)
Size
Partition
Partition
Disk Utility mounts the created partition and represents it with an icon on the
desktop. The icon is labeled with the partition name.
the methods of operation with the USB interface.
1. If this product is in use for the first time or the mode (
) is changed, we must initialize and format the HDD before. (All
information will be eliminated when format hard drives)
2. When you need to change different mode (BIG, JBOD, RAID0/FAST,
RAID1/SAFE) you must press the RESET button, so that the enclosure can
distinguish the exact mode.
3. If you require a faster data transfer,
MODE will be suggested to
use.
4. If you require a higher data security,
MODE will be suggested to
use.
5. If you require a bigger hard disk capacity,
will be suggested to use.
The FANTEC MR-35DUF provides the following Serial Advanced Technology
Attachment (SATA) features:
Automatic negotiation between SATA I (1.5Gbps) and SATA II (3.0 Gbps)
Serial ATA 2.5 specification compliance (Gen2m)
For detailed information about SATA technology, refer to the following
2.2 Firewire interface
3. NOTE :
BIG, JBOD, RAID0/FAST,
RAID1/SAFE
RAID0/FAST
RAID1/ SAFE
BIG MODE
4. Features
4.1 High speed external storage solution, USB2.0, Firewire 1394a/b.
SATA Features
specifications online:
Serial ATA: High Speed Serialized AT Attachment, Revision 1.0a
The Serial ATA web site is http://www.serialata.org/.
14