Attach Rail (P5) to Right Side Panel (P4) with 2 x Cam Nuts (H4). Tighten with a Phillips
Head Screwdriver.
Insert 3 x Dowels (H1) into Right Side Panel (P4). Attach Rails (P6&P7) to Right
Side Panel (P4) with 1 x Cam Nut (H4). Tighten with a Phillips Head Screwdriver.
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
You will need
Phillips Head
Screwdriver
Step 6
1 x Cam Nuts
(H4)
You will need
Phillips Head
Screwdriver
Step 5
2 x Cam Nuts
(H4)
(P4)
(P5)
(P4)
(P6)
(P7)
fantasticfurniture.com.au
Page 7
H4
H4
H1
H4
3 x Dowels
(H1)
