fantasticfurniture.com.au
Step 7
(P4)
(P4)
(H7)
(H4)
(H4)
(H7)
(H10)
(H10)
(P5)
(P1)
24 x Washers (H4)
You will need
12 x Shelf Supports
& Screws (H7)
2 x Magnetic
Door Catches (H10)
You will need
Phillips head
Screwdriver
2x Door hinges/hinge
plates (H8)
Note: the door can be fitted to
open from the left or right side
of the cabinet. These instructions
show how to assemble the door to open from the
left side. If you prefer the door to open from the right side, place the Magnetic Door Catches
on the opposite side of the Top & Bottom Panels.
Insert 2 x Magnetic Door Catches (H10) into the Top and Bottom Panels (P5&P1). Attach 12 x
Shelf Supports & Screws (H7) to Side Panels (P4x2) with 24 x Washers (H4) as shown.
Step 8
ends of the Door Panel (P6) as shown. Slide 2 x Door Hinges (H8) over the top of the Hinge
Plates (H8), ensuring the hinge nodule is positioned in the corners of the Door Panel (P6),
then secure with the Hinge Bolts by tightening with a Phillips Head Screwdriver.
Do not overtighten.
Page 9
(H8)
(P6)
(H8)
(H8)
Peel the backing off 2x Hinge Plates (H8) to expose the adhesive side and place at adjacent
