fantastic furniture Torkay, Руководство по сборке

Страница: 8 / 18

S t e p 7
Page 8
fantasticfurniture.com.au
S t e p 8
2 x Large
Cam Nuts (H2)
You will need:
Phillips Head
Screwdriver
Th is is h ow a ca m nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach centre panel (P6) to back panel (P7). Insert 2 x large cam nuts
(H2) into the centre panel (P6). Using a phillips head screwdriver, rotate
the cam nuts so the arrow points towards the incoming cam bolt. Turn
clockwise to lock.
You will need:
4 x Wooden
Dowels
(H3)
1 x Left
Runner Track
(H11)
6 x Small
Screws
(H7)
Phillips Head
Screwdriver
Insert 4 x wooden dowels (H3) into centre panel (P6).
Attach 1 x right runner track (H12) to the left side of the
centre panel (P6) using 3 x small screws (H7), tightening
with a phillips head screwdriver.
Turn over the centre panel (P6) and attach 1 x left runner
track (H11) using 3 x small screws (H7), tightening with a
phillips head screwdriver.
Ensure the screws are inserted through the holes shown
in the image above.
(P6)
1 x Right
Runner Track
(H12)
(H11)
(H12)
(H3)x4
(H2)x2
(P6)
(P7)
Mallet (soft
headed)
Note: the left side of the centre panel (P6) has cam nut holes at the top.
(H12)
(H7)
first hole
second hole